Hego Sensor / Oxygen Sensor (Bosch)

Hego Sensor / Oxygen Sensor (Bosch)
Oxygen Sensor somtimes called a HEGO Sensor for all models 1997 to 2000 when only one was fitted.

This Particular sensor is a Bosch item and is identical to the Ford OE item but it is a lot cheaper To Locate your oxygen sensor open up your bonnet and at the rear of the engine bay you will see an electrical sensor in the centre of the exhaust manifold, follow this wire back to the bulk head fibre panel and you will see a black block connector. This is your Oxygen Sensor / HEGO Sensor.

To Remove simply unscrew from manifold and remove.

If you are unsure please ring us to make sure. This sensor is a Ford Gold item and is a high quality as you would expect. If yor car has a poor fuel consumption then this sensor can be the cause.

Fitting service also available.


An oxygen sensors the ammount of oxygen in the exhaust gas if it senses that the car is running rich it will adjust the fueling to a set fueling mixture of Lambda 1.00.
If the sensor senses that the mixture is Lean it will adjust so that the mixtre reads Lambda 1.00, This little sensor works very hard in very hot conditions to insure that your runs at Lambda 1.00.
Lambda 1.00 is 14.7 parts air and 1 part Fuel this is the most efficiant fuel mixtre for an engine to run on!

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
0 items
Manufacturer Info
Ford OE
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg